I asked that specific question at PDAC of Mark(I beleive) and he stated that yes the pipeline could be used for the other ore as well, they would just require an extra pipe along side for pumping recycled water.

Regards, K

I have been giving some thought to the upcoming NI report. For me what is most important is how the "Nugget effect" is addressed in our average grade. I don't think we will have any problems proving up tonnage over time, but our perceived/stated initial grade will more than likely be our "grade" for the project from here on in regardless of future results. This has been discussed previously, but for me it makes a difference as to the timing of our NI report release. I would prefer that we can justify the best possible multiple of our existing core grades prior to our first NI report. For me, that is far more important than whether or not the report is 1 week early/late or 8 weeks early/late and would hope that management solves that puzzle prior to our first NI report.

Hope this inspires some conversation.

Regards, K

PC

I have to disagree with you. When I was a little younger (OK a lot) my mother would read Jack and the Beanstalk to me and THAT bean stalk grew up to a Castle in the heavens............... :)))

K

Sorry about format..........

Golden Hope Reports 380.8 Metres of 0.61 g/t Au in T1 Zone from its 2011 Drilling Program at the Timmins-Bellechasse Gold Project in Quebec
TORONTO, Sept. 12, 2011 /PRNewswire via COMTEX/ --
GNH: TSX Venture GOLHF: OTCQX
Golden Hope Mines (TSXV: GNH)(OTCQX: GOLHF) is pleased to announce that it has drilled 380.8 metres grading 0.61 g/t Au (uncut) or 0.55 g/t (cut) on its first completed hole, BD2011-157, of the summer drill campaign on the Bellechasse Gold Belt.
The hole includes the following significant intersections:
Hole Number From(m) To(m) Length(m) g/t (uncut) g/t (cut to 20g/t)
BD2011-157 1.2 69.0 67.8 0.53 0.53
Including 8.0 24.0 16.0 1.01 1.01
Including 58.0 69.0 11.0 1.12 1.12
94.0 123.0 29.0 0.66 0.66
Including 106.0 123.0 17.0 0.83 0.83
177.0 237.0 60.0 0.52 0.52
Including 179.0 188.0 9.0 1.53 1.53
333.0 382.0 49.0 2.53 2.05
Including 333.0 339.0 6.0 10.13 9.07
Including 354.0 358.0 4.0 10.27 6.02
According to preliminary geostatistical analysis of the T1 data, the outliers (2 one meter samples) have been cut to 20 g/t for the calculation of the cut average grade.
The diamond drill hole is located between BD2003-12 and BD2006-50 and was drilled at an azimuth of 139 degrees inclined at 80 degrees and was stopped at 467m depth. See map posted on the Company website at www.goldenhopemines.com/_resources/explorations/summer_2011/cross_section.pdf
"We are extremely pleased with the results of this first hole from the summer drill campaign. We have always believed that the deposit held great potential for mineralization to depth and we believe that this hole, particularly the assay results from the deeper portion of the hole, helps to support that belief in a significant manner" states Frank Candido, President, Golden Hope Mines Limited.
A table of the complete results as well as a cross section has been posted to the company"s web site at www.goldenhopemines.com/exploration/bellechase_timmins_gold/results/campaign_summer_2011/
On May 19th , the Company announced the commencement of its summer drill campaign. The program originally called for an initial 2500 metres in 6 holes. The Company has completed drilling the 6 holes originally proposed. On August 19th the drill campaign was extended by an additional 2000 metres. The drill is currently on the 7th hole of the SGS series (BD2011-163).
Golden Hope Mines Limited retained SGS Canada-Geostat, as independent technical advisors to the Company. SGS designed this drill program to test past results and to further test the T1, T2 and 88 zones to depth.
More precisely, the objectives of the first phase of the program of oriented NQ core drilling are:
1) Identifying and measure mineralized veins structures.
2) Testing extensions of the diorite at depth, which contains the
mineralized veins.
3) Better defining the main mineralized zones to assess grade variability
and select samples for mineralogical and metallurgical tests.
Independent sampling has confirmed mineralization near surface and its extension to depth on the section in question. On that section, the T1 Diorite has been drilled to a vertical depth of about 390 meters.
Samples were prepared and analyzed at SGS Minerals Services of Toronto, Ontario (Don Mills laboratory). Analysis for gold was done on one half of core samples following FAI525 fire assay routine.
Quality Assurance and Quality Control (QA/QC):
SGS introduced standards and blanks in the sequence. These blanks were null and these standards were within acceptable limits (10% of expected value).
SGS"s independent QP"s, Claude Duplessis and Claude Bisaillon are responsible for the first phase of the exploration program as defined by National Instrument 43-101.
James E. Tilsley, P.Eng is acting as the qualified person (QP) for Golden Hope Mines in compliance with National Instrument 43-101 and has reviewed the technical contents of this press release.
Forward-Looking Information

http://www.roguemining.com/s/qwikreport.asp?IsPopup=Y&printVersion=now&X8WQ=442167,442168,442170,442171,443391

Bit of info about Kambalda Style Mineralization

Langmuir Property

Location: 35 kilometres south east of Timmins, Ontario

Minerals: Nickel

Ownership: 100% Rogue Resources

Background

--------------------------------------------------------------------------------

Langmuir Property is accessible by road and is only 30 km south of Xstrata's Timmins Metallurgical Facility which has an idle nickel circuit. The property is also located seven km by road from Liberty Mines Nickel mill which has a capacity of 2000 tonnes/day. Langmuir is comprised of 74 contiguous unpatented mining claims of 856 units (13,841 hectares).

At Langmuir the primary exploration target is Kambalda style nickel sulphide mineralization occurring in ultramafic flows and sills. The Langmuir Property includes over 30 km of terrain comprised of ultramafic and mafic flows and sills favourable for hosting nickel, copper and platinum group mineralization (PGM).

Air borne geophysics has been flown over the entire property by Geotech using VTEM B-field system. More than 20 separate clusters of airborne EM anomalies have been identified.

The Langmuir nickel deposit was found by drilling one of the anomalies in one of the clusters in early 2007. Several other VTEM anomalies and clusters appear on strike with the discovery zone. These anomalies occur in an arcing trend that wraps around the Shaw Dome. This geological environment bears a striking similarity to Kambalda nickel ore deposits which are localized along the flanks of the Kambalda Dome in Western Australia.

Nickel ore deposits in the Kambalda camp often occur in groups or clusters. For example, 12 nickel deposits occur within an ultramafic flow unit of approximately 8 km by 4 km in area. At Langmuir the ultramafic flow package is 20 km long and up to 4 km wide. Therefore, the potential exists on the Langmuir Property to have one or more clusters or groupings of Kambalda style nickel deposits.

Kambalda deposits can be very high grade nickel (+/- Cu, Co, PGE) deposits as exemplified by the type deposits in the western part of Australia. Western Mining Corp. (WMC) was one of the first companies to explore and develop Kambalda nickel deposits in the late 1960's. By the late 1990's WMC was still mining and reportedly producing upto 35,000 tonnes of nickel annually from its' Kambalda operations. This equates to about 77 million pounds of nickel per year. The current price for nickel is about US$12.50 per pound.

Galahad Metals Inc.: Surface Geophysical Survey Outlines Additional Drill Targets at Regcourt Property
OTTAWA, ONTARIO, Aug 02, 2011 (MARKETWIRE via COMTEX) --
Galahad Metals Inc. (TSX VENTURE: GAX) is pleased to announce that a surface, time-domain resistivity/induced polarization (IP) survey has been completed on its wholly-owned Regcourt Gold Project, situated 30 km east of Val-d"Or, Quebec. The geophysical survey covered 7 line kilometers and was carried out by Abitibi Geophysics Ltd ("Abitibi") of Val-d"Or, from May 24-27, 2011 using their proprietary IPower 3D configuration. The Regcourt Property comprises 53 claims covering over 32 km(2)in the eastern part of the Abitibi Greenstone Belt.
Results obtained from the survey, which aimed to help delineate the sulphide-bearing, auriferous, quartz-tourmaline veins around and below the area of the historically active Regcourt Gold Mine, have been processed, and a summary report has been received. The survey has outlined two (2) significant anomalies. The first is a chargeable anomaly within a resistive zone, south of the historic mine workings. Although part of this anomaly was detected by the 2010 down-hole IP survey, the latest results indicate a possible westward extension. The second chargeable anomaly of interest occurs within a strongly conductive, east-west trending feature to the north of the grid, whose linear nature and consistently high conductivity with depth suggests a previously unrecognized shear zone. The chargeability-high within this linear feature may represent an area of mineralization within the shear zone. Galahad intends to test both of these targets during the next phase of diamond-drilling on the Property.
As noted in Press Release #11-18, June 18th, 2011, drilling at Regcourt was completed with 13 DDH of approximately 3100m. Splitting of the core has now been completed, and a very large number of samples have been submitted to the lab in Val d"Or. Due to the significant number of exploration programmes underway locally, a complete set of assays are not expected until late August
The 2010-11 exploration programme at the Regcourt Property is designed to explore and validate historic drill- and underground-intersections around the abandoned Regcourt Mine. A digital compilation of the historic data indicates that the mineralized vein system continues below the historic workings, which only reached 165 metres vertical depth.
The current exploration program is being supervised by John Langton M.Sc., P.Geo, of MRB & Associates, Val-d"Or, who is the Qualified Person as defined by National Instrument 43-101 for the Regcourt Project. Mr. Langton has approved the contents of this release.
For further information, please go to www.galahadmetals.com.
"The statements in this Press Release may contain forward looking statements that involve a number of risks and uncertainties. Actual events or results could differ materially from the Company"s expectations and projections. The TSX Venture Exchange has not approved or disapproved of the information contained in this Press Release."

Contacts:
Robin Dow, President, C.E.O
1-888-834-7708
robin@dowgroup.ca

In Vancouver:
Wayne Meredith
1-604-569-2509
wayne@dowgroup.ca

SOURCE: Galahad Metals Inc.
mailto:robin@dowgroup.ca
mailto:wayne@dowgroup.ca

Copyright 2011 Marketwire, Inc., All rights reserved.