I'm in NJ a State not known to contain any significant amount of gold but I found a site that tested 10ppm from 6 inches to 10 feet deep. The test was performed by the USGS back in the 70's.
Will someone please tell me what amount of gold would be in a ton of earth at 10ppm?
South NJ is not rocky soil, it is mostly sand/loam and clay. What would be the best and easies way for me to test the soil myself for gold?
Thanks for any help!
GollyMrScience:
That would be 10 grams per tonne = about 1/3 of an ounce per tonne = 9.09 grams per ton (for the US folks) = .29 of an ounce per ton
the formula to use for down and dirty converstion is:
1 ppm = one gram in one tonne of sample
A tonne = 2200 pounds = 1000 kilos
so a fast one on the calculator is:
ppm divided by 2200 x 2000 = grams per ton
grams divided by 31.1 = troy ounces
willthedancer:
A walk through some measurement systems:
A metric ton (tonne) is about 2200 lbs. It is 1000 kilograms, and therefore 1 million grams. Love the metric system, as it makes things so easy.
If you have aggregate that tests 10 ppm, then there are 10 grams per ton. Not bad.
Cheers
EDIT, GMS posted his just as I did mine...
Manicminer:
Another way of looking at it is there's 1,000,000g (1 million) in a tonne so 10 ppm (parts per million) is 10g
tomcat:
10 grams of gold/tonne.....is this a good amount per tonne...it sounds pretty good to me <-yahoo_>
